Transport Infant Incubator

Control PanelThe controller is equipped with a display that is easily readable from any angle during transportation. Displays for skin and air temperature assist in the maintenance, regulation, and provision of critical information regarding the infant's thermal support. A microprocessor-controlled system that operates in both air and skin modes. Display both the set temperature and the air/skin temperature. Digital display, extensive alarms, and soft touch operation.input:
output:Alarms

• Low or high skin temperature • Probe malfunction • Low battery • Power failure • System malfunction • Timer malfunction

In the event that the temperature exceeds 380°C, the heater will automatically shut off, thereby guaranteeing the safety of the baby.

Also capable of operating in manual mode.input:
output:
Collapsible stainless steel stand

2/4 number of gas springs for ambulance and hospital transport purposes. The gas spring system enables the stand to collapse when the lever is pulled and the trolley is pressed from both sides.

Characteristics of the performanceTemperature set range: 32°C to 39°C

Temperature variability: 1.0°C

Uniformity of temperature: 1.0 0 C

Air filter: removes airborne particles and dustinput:
output:Convenient AccessThe side access door and front port holes provide rapid and effortless access. The matteress retracts from the hood and the side door folds down to facilitate emergency procedures. Ventilator tubing is supported by the door and tubing ports.The baby bed is equipped with an infant restraint strap.Source of Power~br/>

The transport incubator is capable of operating on either AC or DC power, utilizing AC when it is available or switching to its internal battery when necessary.

Power source: A 12 volt 18 ah battery is employed in the system. VRLA batteries that are sealed and require no maintenance.