Integrated Vacuum Regulator

The vacuum regulator is employed to measure and regulate the vacuum level in the context of medical suction. It facilitates the removal of substances from the patient’s body during surgical procedures. The vacuum regulator should be connected to a vacuum source on the wall using either a direct probe or a rail mounting system. It should be connected to a suction hose and a collection jar.input:
output:Continuous vacuum regulator.

Device that is ergonomic, robust, and compact.

The vacuum gauge can be manually adjusted from -45° to +45° to improve visibility.

A plastic housing safeguards the vacuum gauge.

The pre-adjusted vacuum level is quickly restored by the ON/OFF switch-button.

Central regulation knob with a free rotation at the course’s conclusion (impossible to block).

Rapid modification: 2.5 turns are sufficient to achieve the maximum vacuum level.

Ease of use: the vacuum gauge’s needle changes direction in accordance with the control knob’s movement, either increasing or decreasing the vacuum level.input:
output:
A 100 ml safety jar with a mechanical anti-overflow safety valve and a single-use antibacterial plastic filter are included as standard. This safety jar is unbreakable, autoclavable up to 134°C, and made of polycarbonate. It does not necessitate any sterilization, except in the event of an accidental liquid overflow or perforated filter. Guaranteed savings in terms of both time and money!