Forced Convection Laboratory Incubator

Epoxy-resin-coated galvanized steel sheet, RAL 7035. Lockable unit on four castors.Interior space

Constructed from premium stainless steel. The interior features a slippery surface and rounded corners, which make it easy to clean and meet the most stringent hygiene standards. input:
output:The thermo-jacket circulation system guarantees that the samples are not dried and that the temperature and humidity levels are distributed evenly within the chamber. There is an airflow that occurs outside of the workspace. The circulation fan ceases to operate approximately 40 seconds after the door is opened, despite the fact that the internal temperature is comparable to the prevailing outdoor temperature. The inner casing is merely removed to facilitate a thorough cleaning.input:
output:
Door

A double-walled insulation door that is hinged on the right-hand side. An all-purpose sealing strip that is magnetic and resistant to laboratory cleaning agents. input:
output:Optional:

Triple-glazed inspection window with a cover located in the front door

Dimensions: 32cm in width and 77cm in height (refer to image) with a door lock. Interior fixtures

Usual: 3 pieces of perforated stainless steel shelves (maximum of 22 pieces) Maximum load per shelf: 30 kg in the event of a constant distribution; total load: 120 kg Shelf dimensions are as follows: W = 610 mm, D = 580 mm.Instrument and control panel,incl. temperature controller with digital indication, situated above the doorinput:
output:OLED display on a microprocessor controller. The touch button located beneath the display is used to input the temperature and time. Minutes from 1 to 999 may be utilized to establish time values. input:
output:The KB series is user-friendly, yet it provides a wide range of ramp options and extensive programmability. The intelligent design facilitates rapid and precise temperature regulation, as well as rapid recovery and defrost phases.

A potential-free alarm output is included as standard.