Cremation Furnace

The B&L Cremation Systems, Inc. N-20SA human crematory is our low-volume production system, with an average cremation time of 150 minutes.input:
output:Characteristics

POLLUTION MONITORING AND CONTROL SYSTEM – This system is designed to prevent visible emissions by continuously monitoring the stack gases. This feature is integrated with the automatic system, which allows the unit to automatically make all necessary adjustments.input:
output:FRONT CLEAN OUT – A stainless steel remains removal pan is included in the front of the unit to allow the operator to pull the remains to the front of the chamber and then sweep them into the clean out chute.input:
output:The operation is simplified by the fully-automatic control sequence. A digital readout and a microprocessor temperature controller guarantee optimal control while minimizing fuel consumption. The control panel offers visual confirmation of each stage. Semi-manual control is accomplished by turning a switch to achieve operator override.input:
output:HOT HEARTH DESIGN – This design, which was initially introduced by B&L, enables the recycling of waste heat through the floor, thereby reducing fuel consumption, eliminating fluid issues, and extending the life of the hearth.input:
output:HYDRAULIC LOADING DOOR – This feature is operated by a push-button, allowing the operator to raise the door to the desired height from the control panel. It is a critical safety feature for high-volume installations, as it enhances fuel efficiency and extends the life of the refractory.input:
output:QUIET – The secondary combustion blower has been designed and installed to operate quietly.